Jump to content
Mr.Beer Community


Community Members
  • Content Count

  • Joined

  • Last visited

Community Reputation

1 Neutral

About KZ

  • Rank
  1. Red wheat and white wheat actually have about the same lovibond; I've used both without noticing any differences. The only difference I know of is the size/hardness of the kernel. Regarding the stout, what was the recipe?
  2. Bottle it; if you have a hydrometer you can check the gravity to make sure fermentation is complete, but after three weeks on a standard refill you can pretty much count on it. Clarity in the keg isn't anything to be concerned with, it will clear in the bottle. Cheers!
  3. A pound of DME is fine, and the 5g yeast pack will be fine. Cheers!
  4. Had a 100% maris otter barleywine at my brew club meeting last night. I love MO and have used it quite a bit but never as the only grain, and I was impressed with how much flavor it had. Helps that the couple that brewed it used 16lb of grain, and that it had been aged for a year.
  5. KZ

    New brew

    "k9dude" post=288318 said: "swenocha" post=288263 said:Did you decide against the raspberry? Recipe looks tasty. With that OG, are you thinking somewhere in a 3.85%ish ABV? Also, I'm not sure that steeping 2-row will really get you much out of it, but the other grains are certainly steepable. What were your steep temps? I didn't do any math regarding IBU... What are you shooting for there? :drinking: +1 Next time if I were you instead of steeping I would do a partial mash. It's basically the same process, you just need to hold the temp and let it soak longer. That way you would get something from the 2 row. By steeping it you get next to nothing, but by mashing you can get those sugars out of it. Plus it'll bump that ABV up a bit (not alot but some). Overall it sounds like a good brew! Wish you luck and let us know how it turns out. He basically did a mini-mash without intending too. A good bit of the conversion will be done within the first 30 minutes, but without good temp control (shooting up to 160) and no sparge the efficiency would have been poor.
  6. Welcome! :chug: A little more info on what you brewed, please. Were these HME+booster recipes? The little bit of sugar added for priming should not impact flavor. That being said, cutting back on the priming amount is fine...the MB guidelines for priming are on the high side. Anyway, without having anything to go by I'd guess the cidery flavor is a combination of adjuncts (non-malt ingredients...i.e. sugar or booster) and too little time. Wait a few weeks before the next sample and the flavor should be much improved. EDIT: If you haven't already, I'd recommend reading this and this.
  7. KZ


    Yes, I've used it for quite some time, and I know others here use it as well. Like Trollby said they recently overhauled it, and now that I've gotten used to the new format I like it and like the additional functionality they've added.
  8. "Brewsus Yeast" post=288078 said:I bottled my Winter Dark last night. FG 1.012. It didn't taste as good as I had hoped. It was very dry and bitter. Perhaps that bitterness will condition out, but I didn't get any of the caramel/toffee I was expecting. I didn't get much in the way of hops flavor/aroma, either. Just bitter. :S How did everyone else's turn out? Honestly I'm not too surprised...when I saw an IBU of 60 (if it's legit) I thought that was pretty high for the style and gravity. The BU:GU is going to read really high, same with the Diablo...almost like they were purposely overhopped so that an additional DME/LME addition would temper them a bit (a la the deluxe refills).So that's what I did - added a pound of LME to the Diablo and a touch of finishing hops and a pound of LME to the Winter Dark. Even so the hydro sample of the Diablo was bitter...haven't tried the Winter Dark yet, but I'm hoping I've balanced it a bit.
  9. For an IPA, I would boil about half the chips for 10 minutes, then add after primary fermentation for a week or two as a start and see if you like the results. If you plan to secondary you can use less chips/more time. Definitely agree with FIT - I love bourbon barrel beers and have made a number of them, though I don't think it goes with an IPA. Save that for a stout, dark Belgian, porter, strong ale, etc. FWIW, I have a container of oak cubes soaking in bourbon at all times so I always have some on hand. They've usually soaked for several months between uses. I believe the sulfite solution is being used as a sanitizer. Cheers!
  10. First things first - what type of batch are you looking to make? All Mr. Beer products? Extract + steep? All grain?
  11. Looks good, hope it turns out well! :chug:
  12. Thanks for sharing, I've thought about trying to clone it...it is indeed an awesome beer that drinks way bigger than the gravity suggests. Cheers!
  13. I would think something like the dark winter ale would be a better base, but that's your call. I will say to go *very* easy on the cloves. It does not take much to overpower the whole beer. Cheers!
  14. "Gizmo" post=287245 said:I wish I could just do full volume BIAB, but my 16qt pot is just not big enough. I've done full volume traditional BIAB, and have much better luck doing it similar to you. I use a more traditional mash thickness then a separate batch sparge and get much better efficiency this way.
  • Create New...